Chemistries CLAROS                 800-227-4224

SC1000 Probe Module, 6 sensors, 4 mA OUT, 4 mA digital IN, 4 relays, Modbus (RS485), 100-240 VAC, with US power cord

SC1000 Probe Module, 6 sensors, 4 mA OUT, 4 mA digital IN, 4 relays, Modbus (RS485), 100-240 VAC, with US power cord
Product #: LXV400.99.5B532
USD Price:
Qty in Cart:0

More Confidence in Your Instrument’s Performance

Available exclusively on Hach instruments, Prognosys predictive diagnostics uses innovative diagnostic software to read multiple inputs from your instrument and alert you to the instrument's overall performance and upcoming maintenance. An easy-to-read dashboard provides instant indication of measurement reliability and service requirements. Process control has never been easier.

Plug and Play Operation

There’s no complicated wiring or set up procedures with the SC1000 controller. Plug any Hach digital sensor into a Probe Module and it’s ready for use. No special ordering or software configuration is needed.

Communication Options to Fit Any Application Need

The Hach SC1000 controller features state-of-the art Modbus TCP/IP communications protocol for seamless integration into a network of devices that support TCP/IP sockets. Use a standard Ethernet cable or connect wirelessly using GSM/GPRS to communicate with your SCADA, PLC or other network. Available with analog 4-20mA, Modbus 485, Profibus DP, or HART digital communication options.

Expandable and Upgradable

The SC1000 controller can adapt to your needs. Add or change probes without having to change the controller. Plus, with a single Display Module, additional Probe Modules and associated sensors can be added or removed depending on operational needs. Fully upgradable software ensures that this system will not be obsolete. Hach service plans are available.

What's in the box?

SC1000 Probe Module with installed cards (as requested), Basic User Manual


Alarm: Low alarm point, low alarm point deadband, high alarm point, high alarm point deadband, off delay, and on delay
Analog Output Functional Mode: PID, high/low phasing, setpoint, deadband, overfeed timer, off delay, on delay
Certifications: North American Certifications:
cTUVus to UL 61010A-1 and CSA C22.2 No. 1010.1

European Certifications:
CE per 73/23/EEC and 89/336/EEC
TUV-GS to EN 61010-1
EN 61326 Amd's 1 & 2
Communication: Modbus® (RS485): Advanced communications/networking with PLC or SCADA system directly from analyzer
Profibus® DP/V1 (certified)
GSM/GPRS Quad-band cellular module (FCC and IC approved, EU and US only)
Ethernet service port, RJ45, 10 MB/s
Dimensions (H x W x D): 150 mm x 315 mm x 250 mm
Display: 1/4 inch VGA graphical backlit TFT color Glas/Glas-Touch screen, high resistance, 320 x 240 pixels 320 x 240 pixels
Display Viewing Area: 11.4 x 8.6 cm (4.5 x 3.4 in)
Enclosure Rating: IP65
Inputs: Up to 12 analog 0-20 mA, maximum impedance 500 Ohms per probe module. Additional analog inputs are available with additional probe modules.
Material Enclosures: ABS (display module) and metal (probe module) enclosure with corrosion resistant finish
Mounting Configurations: Surface, panel, and pipe (horizontal and vertical) with optional sun shield
Operating Temperature Range: -20 - 55 °C / 0 - 95% relative humidity, non-condensing
Output: Up to 12 analog 0/4-20 mA, maximum impedance 500 Ohms per probe module.
Additional analog outputs with additional probe modules. Optional digital communcations via Modbus® (RS485) and Profibus® DP/V1.
Power Options: 100-240V, US power cord
Power Requirements (Hz): 50/60 Hz
Power Requirements (Voltage): 100 - 240 V AC, 24 V DC
Relays: Up to four SPDT, user-configurable contacts rated 100 to 230 VAC, 5 Amp resistive maximum per probe module. Additional relays are available with additional probe modules.
Sensor: 6 Sensors
Storage Conditions: -20 to 70 °C (-4 to 158 °F), 0 to 95% relative humidity, non-condensing
Warranty: 1 year
Weight: Approximately 6.5 kg (depending on configuration)