GS1440 Sensor H₂S - Monitoring in Water or Air

GS1440 Sensor H₂S - Monitoring in Water or Air

Product Number: LXV449.99.10000

Available

Certified for hazardous environment

Price: Contact Us
Talk to an Expert

Water or air, measure H₂S where it matters – right at the source

Meet your needs with the new hydrogen sulfide sensor from Hach. Whether in water or air, you will have the direct H₂S measurement you need to optimize your H₂S treatment process and proactively control H₂S before it causes issues. Data and trends can easily be accessed via wireless or hard-wired connections, so that you will gain actionable insights into H₂S levels, protect valuable assets from corrosion, and avoid public nuisance from odor.
The GS1440 sensor is made for use in non-hazardous locations.

*All sensors should be calibrated on-site with the calibration kit upon installation, and at regular intervals thereafter (every 1-6 months depending on the application). Calibration gas and kit can be purchased via https://certgas.com/
** The Cable Guard accessory should be installed with any sensors that are intended for intermittent or continuous submersion in water. Please see the accessories page for all accessory and cable options.

Applications:

  • Biosolids Dewatering
  • Discharge
  • Neutralization
  • Pre-Treatment
  • Secondary Treatment

Benefits

Designed for tough applications in water or air

With stationary and portable options, measure H₂S in water or air with this robust, fouling-resistant sensor – whether at the plant or sewers!

Actionable H₂S measurements helps you to stay ahead of your process

Early detection makes it easier than ever before to protect infrastructure, anticipate odor, and minimize buildup.

Reliable H₂S data ready for you when you need it, how you need it

Actionable data and trends from this sensor can be accessed by wireless or hard-wired connections. Using the cloud based Hach WebData solution, users will have access to accurate measurements in water or air with ease.

Continuous H₂S monitoring made simple

This corrosion-resistant stainless-steel instrument can be inserted in pipes or installed in a flow cell, making ultra-tight spaces easy for continuous H₂S monitoring. Cleaning is as simple as wiping the sensor head before each calibration, and calibration only takes five minutes.

Loading

Videos

Label Definitions*

Product Life Cycle

*when applicable

Phase Out

Items with this label are at the end of their life cycle and may become obsolete in the future.

Obsolete

Items with this label are obsolete and unavailable through eCommerce.
If applicable, please view Replacement Product above or contact Hach Customer Service for further assistance.