Hach understands that electroplating and coating manufacturers need accurate monitoring of a range of chemical components to ensure product quality, optimize production processes, support water conservation, and ensure regulatory compliance.

Industrial Wastewater Treatment

Ensure Instrument Reliability, Cost Efficiency and Compliance

At Hach®, we embrace the challenge to continuously improve wastewater treatment monitoring equipment and processes to help your industrial plant stay in compliance and ensure instrument reliability. Best of all, Hach solutions will help control costs while operating at the highest possible levels of health and safety.

  • Airports

  • Beverage

  • Chemical

  • Food

  • Manufacturing

  • Maritime

  • Metals and Mining

  • Petrochemical

  • Plating

  • Power Generation

  • Pulp and Paper

Shop Now

Group of workmen in a petroleum refinery managing industrial wastewater

Featured Products


AS950 All- Weather Refrigerated Sampler

AS950

Accurate, easy and intuitive, the AS950 simplifies your sampling process with a large, full-color display, USB upload and download capabilities, and the ability to copy programs sampler to sampler to save time on tedious programing.

Shop Now

HQ430D Water Quality Laboratory BOD Meter

HQ430D

Take the guesswork out of BOD measurement with the HQ430D. HQD® meters connect with smart IntelliCAL® electrodes that automatically recognize the testing parameter, calibration history, and method settings to minimize errors and setup time.

Shop Now

Solitax ts- line sc immersion probe

Solitax ts- line sc immersion probe

The Solitax ts-line sc immersion probes provide accurate, color-independent suspended solids and turbidity measurements. This system’s reliable performance and full data communication capability help improve process control and reduce treatment cost.

Shop Now

 

Industrial Wastewater Treatment: Critical Measurements

Learn which measurements are critical throughout the wastewater treatment process.

Sensor and/or Analyzer

Sensor and/or
Analyzer

+

Controller

Controller

+

Mobile Sensor Management Software

Mobile Sensor
Management
Software

=

Your
Solution

Data Quality with Mobile Sensor Management

Quick Status Check

Many plant managers have concerns about trusting their data. Hach customers typically trust their data after just three short weeks of adopting Claros process management solutions.

Mobile Sensor Management allows you to view your measurements and instrument status—anytime, anywhere on any web-enabled device. The included Prognosys Predictive Diagnostic Software monitors the instrument’s internal components and tracking service requirements. Then, Mobile Sensor Management alerts you to upcoming maintenance tasks or identifies immediate issues requiring attention. It also provides simple maintenance instructions in the palm of your hand to give operators and plant managers the confidence that the maintenance is being done correctly.

Avoid Downtime

With Mobile Sensor Management, you can avoid unexpected downtime and have confidence in your water quality measurements.

Worry-Free Data Security

Keep Your Data Safe

Data security is our priority. Hach is committed to protecting the integrity of your data, with comprehensive data security processes, continual evaluation and best-in-class partners such as Microsoft Azure to ensure data sovereignty and to eliminate opportunities for external intrusion. From data generation to transmission, storage and retrieval, Hach is committed to keeping your data safe, now and into the future

Industrial Wastewater Parameters

A variety of parameters are used in industrial wastewater pre-treatment, biological wastewater monitoring and receiving water discharge. Browse below to learn more about why these parameters matter. Or choose Shop Now to see solutions.

Shop Now

Alkalinity

Measuring alkalinity in water will inform its capacity to neutralize acids or absorb hydrogen ions. A slightly alkaline pH is important for effective biological treatment. The process of nitrification destroys alkalinity, which can result in a drop in pH, which will inhibit bacteria. Having visibility into your alkalinity will help avoid permit violations for ammonia and or pH.

Ammonia

Monitor conversion of ammonia and organic nitrogen forms to nitrite and nitrate during the WW treatment process. Provides information on process conditions in biological treatment stages. At high concentrations and pH, ammonia can be toxic to sludge digestion microbes.

Automatic Sampling

Automatic samplers are required to pull samples from different locations within a process so that laboratory tests can be performed. Samples may be collected as a composite or discreetly, depending on site and permit requirements.


BOD5 and CBOD

BOD5 and CBOD indicate a relative measure of “food” available, the degree of stabilization of the wastewater and estimate the effect of the effluent on the receiving water body. Used for plant loading/design, discharge rate for industrial facilities and EPA NPDES reporting. Many plants use COD or TOC as an early estimate. Used to calculate % removal.

Chemical Oxygen Demand

Used as a correlative/early indicator of BOD levels. Some NPDES permits include COD as a surrogate for BOD; however, BOD is the standard reportable parameter for oxygen demand in wastewater. COD provides a measure of organic “food” available to biological treatment steps and to estimate the effect of discharge to receiving water.

Chlorine Total and ULR

Chlorine is added to kill pathogens and reduce odor. Measuring chlorine will help ensure that your wastewater is properly disinfected by removing pathogens as well as satisfy regulations that require the removal of excess chlorine before discharge to surface waters.


Color

Color can be an indicator of turbidity or suspended matter. The removal of this matter can be gauged by measuring color, which can indicate if the water quality is suitable for discharge.

Conductivity

Measuring conductivity is a common method for determining the metal concentration in wastewater. Removal of these metals prevents environmental concerns. Conductivity is also an indicator of dissolved sodium which can assess stages of the treatment process that cause changes in conductivity.

Dissolved Oxygen

To stay alive, the organisms that breakdown organic matter rely on oxygen. When there is not dissolved oxygen present, these organisms will die. On the other hand, too much oxygen could signify that your wastewater treatment process is wasting energy. Measuring dissolved oxygen levels can help dial in the right amount of aeration.


Flow Meters

Flow measurement is crucial to a plant to know the volume and rate of the liquid passing through each process. These measurements are used to calculate loading and concentration factors for processing.

Nitrate

Nitrate is indicative of the stage of conversion of ammonia and organic nitrogen forms to nitrate by the aerobic biological treatment steps (nitrification).

Organic Acid

Determine if acidification has occurred during the effluent pre-treatment stage of your treatment process by monitoring pH and alkalinity. Making adjustments to pH and alkalinity balances organic acid.


Organic Load

Indicates the amount of carbon nutrients required to feed and keep healthy the microorganisms in the process aeration basin. This parameter gives an indication of efficiency of the anaerobic digester process.

ORP / Redox

Oxidation Reduction Potential is the ability for a solution to accept or lose electrons and therefore be “reduced.” ORP can help determine whether activated sludge zones are anaerobic or anoxic to enhance biological nutrient removal. They are best applied as a trending tool.

pH/Temperature

Maintain proper (narrow) pH range for optimal biological processes—especially nitrification. pH and temperature can indicate plant upsets by industrial discharges or the development of anaerobic conditions within the plant. It’s also an important parameter to assess methane formation and avoiding ammonia toxicity in sludge digesters.


Phosphate / Ortho

Phosphate is removed via biological nutrient removal processes and/or chemical precipitation. Reactive (ortho) phosphate is the phosphorus form that is most available to biological species.

Sludge Level

Having a clear measurement of sludge helps monitor sludge levels in the aeration tank, where sludge is mixed with air to breakdown organic matter. Monitoring sludge levels can indicate sludge buildup, process and chemical efficiency and sludge settleability.

Spectral Absorption Coefficient

Measuring Spectral Absorption Coefficient is excellently suited to use as a regulation parameter for an ozone system.


Total Nitrogen

Total of ammonia, nitrate, nitrite and organic nitrogen forms.

Total Organic Carbon

TOC levels in water impact treatment and re-use decisions. With data on TOC levels, water managers can make the most efficient and cost-effective decisions for treatment and reuse of important water supplies.

Total Phosphorus

Phosphorus effluent concentrations are often controlled by discharge permits to limit the addition of nutrients to the receiving body. Total phosphorus may be removed either biologically or chemically. It includes ortho-, poly- and organic phosphorus.


Total Suspended Solids

TSS is the most commonly measured and regulated parameter on NPDES permits. Used to measure mixed liquor suspended solids concentration, return activated sludge/waste activated sludge concentration, influent suspended solids concentration, effluent suspended solids concentration and % removal.

Toxicity

COD is the sum parameter that provides the most reliable and timely information about the oxygen-depleting effects of organic pollutants in wastewater. COD also supplies an estimate of the effect of your plant’s effluent on the receiving body.

Turbidity

Turbidity is a surrogate measurement for solids concentration. This parameter often is used to indicate solids carry-over from secondary clarifiers.


Watch Webinar On-Demand: Industrial Wastewater – Innovative Solutions for Real-Time Management, Online Monitoring and Connected Data

Are you prepared for the unknowns of tomorrow in your wastewater stream? Watch this webinar to learn about innovative solutions to take control of your wastewater treatment plant and pretreatment processes—from dosing to downtime and everything in between with solutions that provide real-time information, connected data, and online monitoring.

View Product Resources

View Products and Services

Your selection

  • Instrument
  • Wastewater
  • Industrial

Market Class

Parameter

Product Type

Product Sub-Type

Application

Topic

Topic Detail

Method/Technology

Method Number

Location

Industry

Loading

Have Questions About This Industry? We Have Answers!

Contact us for tech support, service, sales, or to get a quote.