Chemistries CLAROS                 800-227-4224

Hach pHD sc Online Process pH Sensor - General Purpose pH Sensor

Hach pHD sc Online Process pH Sensor - General Purpose pH Sensor
Product #: DPD1P1Q06
USD Price:
Ships within 1 week
Qty in Cart:0

Exceptional Process pH Sensor Performance with the Differential Electrode pHD Measurement Technique

This field-proven technique uses three electrodes instead of the two normally used in conventional pH sensors. Process and reference electrodes measure the pH differentially with respect to a third ground electrode. The end result is unsurpassed measurement accuracy, reduced reference junction potential, and elimination of sensor ground loops. These process pH sensors provide greater reliability, resulting in less downtime and maintenance.

Lower Maintenance Needs with the Double Junction Salt Bridge

The double junction salt bridge creates a barrier to contamination which minimizes the dilution of the internal standard cell solution. The result is lower maintenance needs and a longer time period between calibrations.

Extended Working Life with the Replaceable Salt Bridge/Protector

The unique, replaceable salt bridge holds an extraordinary volume of buffer to extend the working life of the sensor by protecting the reference electrode from harsh process conditions. The salt bridge simply threads onto the end of the sensor if replacement is needed.

Reliability with Built-in Encapsulated Preamp

Encapsulated construction protects the sensor’s built-in preamp from moisture and humidity, ensuring reliable sensor operation. The preamp in the pHD analogue sensor produces a strong signal, enabling the sensor to be located up to 1000 m (3280 ft.) from the analyser.

Patented Technology

The former GLI, now a Hach Company brand, invented the Differential Electrode Technique for pH measurement in 1970. The pHD sensor series takes this field-proven technology to a new level.


Accuracy: ± 0.02 pH
Body material: PEEK
Cable Connection: Digital
Communication: Modbus
Diameter: 35.4 mm
Drift: 0.03 pH per 24 hours, non-cumulative
Electrode Type: General Purpose
Flow Rate: 3 m (10 ft.) per second, maximum
Length: 271.3 mm
Operating Temperature Range: Analog Sensor with Digital Gateway: -5 - 105 °C
  Digital Sensor: -5 - 70 °C
pH Range: 0 - 14 pH
Pressure Range: Maximum 10.7 bar . 6.9 bar for Digital Sensor at 70°C, and 6.9 bar for Analog Sensor at 105°C.
Repeatability: ± 0.05 pH
Sensitivity: ± 0.01 pH
Sensor Cable: 10 m (33 ft.) polyurethane, 4-conductor cable with one shield, rated to 105°C (221°F)
Sensor Thread: 1" NPT
Storage Conditions: 4 - 70°C, 0-95% relative humidity (non-condensing)
Temperature Accuracy: ± 0.5 °C
Temperature Compensation: Automatic with NTC 300 Ω thermistor, or manually fixed at a user-entered temperature,
additional selectable temperature correction factors (ammonia, morpholine, or user-defined pH/°C linear slope) available for pure water automatic compensation 0.0 - 50 °C
Temperature Sensor: NTC 300 Ω thermistor for automatic temperature compensation and analyzer temperature readout
Transmission Distance: 1000 m (3280 ft.), maximum when used with a termination box.
  100 m (328 ft.), maximum
Weight: 0.316 kg
Wetted Materials: PEEK or Ryton (PVDF), salt bridge of matching material with Kynar junction, glass process electrode, titanium ground electrode, and Viton O-ring seals (pH sensor with optional HF-resistant glass process electrode has 316 stainless steel ground electrode, and perfluoroelastomer wetted O-rings; consult factory for other available wetted O-ring materials)