-
English (US)
Choose your country or region:
Europe
Asia - Australasia
Middle East - Africa
Product Number: C33A1NN
Model C33 Contacting Conductivity Controller has two sensor inputs which can be independently configured to measure conductivity, resistivity or total dissolved solids. The C33 accepts the Model 3400-series Enhanced Performance Conductivity Sensors and others.
Sensor A and B can be independently selected to measure conductivity (μS/cm or mS/cm), resistivity (MΩ • cm or KΩ • cm), or total dissolved solids (ppm or ppb). The measured values or temperatures for Sensor A or B can be displayed separately or together (four total measurements). Both analog outputs can also be displayed. The Model C33 can provide a calculated Sensor A and B measurement (% rejection, % passage, ratio A/B, ratio B/A, difference A-B, or difference B-A). Front panel red LEDs indicate relay on/off status.
Model C33 accurately measures conductivity down to 0.056 μS/cm and resistivity up to 18.2 MΩ • cm, both at 25.0°C.
The two-line, 16 character backlit LCD provides excellent viewing contrast under all lighting conditions.
The simple keypad and logical menu structure make this analyzer easy to use. Menu screens guide you through setup, calibration, operation, and test/maintenance functions.
All screens can be selected for display in English, French, German, or Spanish.
*when applicable
Phase Out
Items with this label are at the end of their life cycle and may become obsolete in the future.
Obsolete
Items with this label are obsolete and unavailable through eCommerce.
If applicable, please view Replacement Product above or contact Hach Customer Service for further assistance.
