Chemistries CLAROS                 800-227-4224

EZ Series Ammonium Analyzers

The EZ Series Online Analyzers offer multiple options to monitor Ammonium in water. Typical applications are wastewater, drinking water, steam & power generation, surface water.

The EZ1000 Series Analyzers use colorimetric analysis to measure Ammonium:
- EZ1002, Berthelot method, standard measuring range: 0 - 1 mg/L NH4-N
- EZ1003, Nessler method, standard measuring range: 0 - 2 mg/L NH4-N
Options for the EZ1000 Series include:
- Calibration to 10%, 25% or 50% of standard range
- Internal dilution

The EZ3000 Series Analyzers use direct ISE analysis:
- EZ3000, standard measuring range: 1 - 10 mg/L NH4-N
- EZ3001, standard measuring range: 10 - 100 mg/L NH4-N
- EZ3002, standard measuring range: 100 - 1000 mg/L NH4-N

The EZ3500 Series Analyzers use ISE measurement with standard addition:
- EZ3500, standard measuring range: 1 - 10 mg/L NH4-N
- EZ3501, standard measuring range: 10 - 100 mg/L NH4-N
- EZ3502, standard measuring range: 100 - 1000 mg/L NH4-N
Options for the EZ3000 and 3500 Series include:
- Calibration to 25% or 50% of standard range

The EZ4000 Series Analyzers are single-parameter titrators with a wide measuring range:
- EZ4005, standard measuring range: 0 - 5000 mg/L NH4-N

Options for all analyzers include:
- Multiple stream analysis (1-8 streams) reducing cost per sampling point
- Analog and/or digital outputs for communication

Some applications may require the use of a sampling/filtration or an external dilution system for sample preconditioning. For this option please check the EZ9000 Sample preconditioning page.

Use the filters in the table below to find your Ammonium Analyzer. Need support or a different configuration? Please contact us.
 
items per page 10   |   20   |   50