Ultraturb Seawater sc sensor with 5m cable

Ultraturb Seawater sc sensor with 5m cable

Product Number: LPV415.99.22002

Ships within 3-5 weeks

Cable Length

Price: Contact Us
Talk to an Expert

The turbidity bypass sensor that brings clarity

Turbidities in the range of FNU (NTU) 0.0001-1,000 are measured and displayed alphanumerically using a controller. This high resolution facilitates precision differentiation, even for ultra clear liquids. A pulsed, long-life IR radiation source (LED) ensures that costs are minimized. Designed in accordance with DIN EN ISO 7027 and permanently calibrated before leaving the factory. All key data is set to practical standard values. The instruments are immediately ready for use after connection to the power supply and the supply of sample water. The measuring range and all data outputs are modified to suit requirements using menus on the controller. All optical and electronic assemblies are installed in housings that are physically very strong and proof against water jets.


Benefits

Large measuring range: 0.0001 - 1,000 NTU

The Hach® Ultraturb Seawater sc sensor measures turbidity from 0 to 1000 FNU (NTU) for a wide variety of low to medium range turbidity applications. Use it to effectively monitor conventional filtered water processes, effluent water, distribution systems, and elevated tanks where small-sized particulates or air entrapment may be an issue.

Self-cleaning Sample Chamber Option

The Ultraturb Seawater sc sensor is available with an automatically self-cleaning sample chamber that guarantees stable measured values. The silicon wiper blades inside the sample chamber are held in place with a magnetic coupling wheel to further keep the sample chamber intact.

Suitable for seawater, brackish water, raw water and other applications

The Ultraturb Seawater sc sensor is resistant to salt concentrations up to 65 g/L.

Ratio Methodology Detects Sample Chamber Fouling

The Ultraturb Seawater sc sensor uses ratio methodology with detection at 90° and 180° to minimize reflections in the measuring cell and on the windows. In this way, fouling of the sample chamber is detected earlier than with a single detection system.

Compatible with Hach Multi-Sensor, Multi-Parameter Digital Controller

The Ultraturb Seawater sc sensor can be used with Hach’s sc Digital Controllers. The SC4500 controller accepts up to two sensors and the SC1000 accepts up to eight sensors. Multiple controllers can be networked to accommodate many more sensors and parameters, reducing the cost per measuring point. Just plug in any Hach “plug and play” digital sensor and it’s
ready to use without software configuration. “Plug and play” connectivity means there’s no complicated wiring or set up. Network the Ultraturb Seawater sc sensor with any of Hach’s digital sensors for measuring dissolved oxygen, ORP, conductivity, and many other parameters.

The Hach Ultraturb Seawater sc sensor meets the ISO 7027 turbidity requirements for on-line process turbidity.

Loading

Label Definitions*


Product Life Cycle

*when applicable

Phase Out

Items with this label are at the end of their life cycle and may become obsolete in the future.

Obsolete

Items with this label are obsolete and unavailable through eCommerce.
If applicable, please view Replacement Product above or contact Hach Customer Service for further assistance.