-
English (US)
Choose your country or region:
Europe
Asia - Australasia
Middle East - Africa
Product Number: LXV400.99.00122
A fully modular system consisting of a display module and one or more probe modules.
The Hach SC1000 Multi-parameter Universal Controller is a state-of-the-art modular controller system. Use it directly with 8 sensors or network several together to accommodate many more sensors and parameters.
The SC1000 consists of a Display Module and one or more Probe Modules. The SC1000 Display Module is intuitive, with an easy to use interface and large color touch-screen display that can be used for any number of parameters. One Display Module controls one or several Probe Modules connected by a digital network. The Display Module is fully portable, andcan be disconnected and moved anywhere within the network. The Display Module is also available with GSM/GPRS, ethernet and TCP/IP capability. Each SC1000 Probe Module provides power to the system and can accept up to 8 digital sensors/expansion boards. Probe Modules can be networked together to accommodate up to 32 digital sensors/expansion boards attached to the same network.
There’s no complicated wiring or set up procedures with the
SC1000 controller. Just plug the sensor into a Probe Module
and it’s ready for use. No special ordering or software
configuration is needed.
Any Hach digital sensor can be plugged into the SC1000
Probe Module in any combination. Available parameters
include—but are not limited to—dissolved oxygen, pH, ORP,
conductivity, turbidity, suspended solids, nitrate, chlorine, ammonia, phosphate, etc.
Communication and relay options for the SC1000 controller
can be configured to suit any situation. Available
configurations for a single Probe Module include:
• up to 4 relay contacts for alarm and control functions,
• up to 12 analog outputs for measured values,
• up to 12 analog or digital inputs from non-digital sensors
(i.e., flow or pressure sensors),
• up to 8 digital inputs from digital sensors,
• select from multiple network card options such as
Modbus, Profibus DP, and more.
Use the SC1000 controller for hassle-free communications.
Advanced communication features include:
Modbus TCP/IP—The SC1000 controller features
state-of-the art Modbus TCP/IP communications
protocol for seamless integration into a network of
devices that support TCP/IP sockets. Use a
standard Ethernet cable or connect wirelessly using
GSM/GPRS to communicate with your SCADA,
PLC or your organization’s network.
The Hach SC1000 Controller can adapt to your needs.
Change probes without changing the controller. With a
single Display Module, additional Probe Modules can be
added or removed depending on operational needs. Fully
upgradeable software ensures that this system will not be
obsolete. Hach service plans are available.
*when applicable
Phase Out
Items with this label are at the end of their life cycle and may become obsolete in the future.
Obsolete
Items with this label are obsolete and unavailable through eCommerce.
If applicable, please view Replacement Product above or contact Hach Customer Service for further assistance.
